NEO Employers: Hire new engineers through Cleveland State University!
Are you looking for new engineering talent with fresh ideas that can help solve an engineering challenge your company is facing? Have an R&D problem but don’t have the time or resources to tackle it? Want to introduce prospective new employees to your company while supporting the next generation of engineering professionals?
If you answered yes to any of the questions above, then the Senior Design Program at CSU’s Washkewicz College of Engineering is for you!
Senior Design is the culmination of students’ engineering education at CSU. The two-semester long capstone course gives student-teams the opportunity to incorporate engineering principles they have learned over the course of their academic careers into one final project. At the conclusion of the two-semester course, teams provide their sponsors with a solution (or prototype) to the problem presented to them, along with a written report.
For the past two years, the College has partnered with local industry to provide real-world projects for students to work on. Industry partners have ranged in size from large multi-national corporations to small manufacturing shops. Past program sponsors include Parker Hannifin, Lincoln Electric, Rockwell Automation and the Dan T. Moore Company to name a few. There are many examples where Senior Design project prototypes have gone directly from the classroom into production on a company’s factory floor.
CSU is currently recruiting sponsoring companies for the 2016-2017 academic year beginning on August 29, 2016.
One remarkable thing about the list is that it rarely changes. The order may change but the top cited standards typically don’t change. Top 10 Sited Safety and Health Violations: 501 - Fall Protection 1200 - Hazard Communication 451 - Scaffolding 134 - Respiratory Protection 147 - Lockout/Tagout 178 - Powered Industrial Trucks 1053 - Ladders 305 - Electrical, Wiring Methods 212 - Machine Guarding 303 - Electrical, General Requirements Three of the 10 sited standards are directed at the construction standard (1926) while other fall within the general industry (1910). It should be noted however that the general industry standard also has fall protection guidelines. Year after year, inspectors see the same on-the-job hazards, any one of which could result in a fatality or severe injury. More than 4,500 workers are killed on the job every year, and approximately 3 million are injured. By understanding these regulations you can improve your safety program and prevent injuries. Give me a call if you have any compliance doubts, or want to review OHSA regulations. Gwido Dlugopolsky at 216-391-7766 or email@example.com
Why does it take a NASCAR pit crew only 15 seconds to change four car tires when it takes people like you and me minutes? The answer is simple SMED. Single Minute Exchange of Dies, or SMED, is a process for reducing the time it takes to do equipment changeovers. Using the principles of SMED you should be able to perform any changeover in your facility in under 10 minutes! The SMED process is simple – convert as many changeover steps as possible to “external”, meaning they are done while your equipment is still RUNNING, while simplifying and streamlining the remaining steps. SMED is broken down into the following 3 Steps: Separate Convert Streamline We found this article to be very helping in explaining the SMED process in more detail: LEAN PRODUCTION - SMED A good first step to achieve this level of SMED efficiency would be to run a kaizen event at your facility to standardize (5S) your tools and supplies. Doing this alone will help you achieve 40% to 50% greater efficiency. Once the “low hanging fruit” is gone, you can still reduce setup times another 20% by practicing more advanced SMED principles.
The secret to closing any sale is to reduce uncertainty in the buyer and replace it with confidence in YOU, your PRODUCT/SERVICE, and your COMPANY. Step 1 – Confidence in YOU Someone buying from you wants to be able to fundamentally connect with you on a human level and feel confident that you’re an expert in what you’re selling If you’re selling paperclips, be an expert in paperclips If you’re selling design and engineering related services, be an expert in design and engineering related services Focus on addressing the problem, not the solution….MEANING you already know you have the solution, connect with the buyer by being an expert with the problem he/she is facing. Prove that you know the problem and all aspects of the problem like the back of your hand. Step 2- Confidence in the PRODUCT/SERVICE you are selling Someone buying from you needs to trust the product/service you are selling will solve their problem. It’s your responsibility to deliver a solution and the benefits associated with it. Basically you need to “Hit a Homerun” communicating this message. Tip – Use Success Stories: Share with the potential buyer examples of your product/service solving problems and delivering value for