MAGNET Client Receives Award for Business Leadership and Quality Excellence
Local manufacturer LEFCO Worthington was recently presented with the Quality Service Leadership award at the 21st annual Business Leadership Awards Program.
Sponsored by the Rotary Club of Cleveland, the Monte Ahuja College of Business at Cleveland State University, The Council of Smaller Enterprises (COSE), the International Business Network (IBN), the Sustainable Business Center (SBC), and MAGNET, the 2017 ceremony took place late last month at Windows on the River in Cleveland.
Since 1997, MAGNET has presented this award to manufacturing companies who exemplify operational excellence and an ongoing commitment to continuous improvement. Other factors, such as overall business performance and customer satisfaction, are also taken into consideration.
Previous winners include La Bamba Tortilleria, Great Lakes Brewing, Avtron, and MobilityWorks.
LEFCO Worthington is a Cleveland manufacturer of protective packaging that specializes in custom wood crates, heavy-duty bases, foam packaging, and lumber cutting and distribution services. The company to small and mid-sized companies in various industries, such as defense, transportation, aerospace, medical, and custom equipment manufacturing.
After working with MAGNET in 2015 to restructure, reduce turnover, and improve operations, the company was able to retain 8 jobs, lessen lead times, generate additional revenue, and foster a stronger relationship between higher management and employees.
Hear more of their story by watching the video below!
Want to know how MAGNET can help you grow your business? Call Linda Barita at 216.391.7766 or email firstname.lastname@example.org to get started.
One remarkable thing about the list is that it rarely changes. The order may change but the top cited standards typically don’t change. Top 10 Sited Safety and Health Violations: 501 - Fall Protection 1200 - Hazard Communication 451 - Scaffolding 134 - Respiratory Protection 147 - Lockout/Tagout 178 - Powered Industrial Trucks 1053 - Ladders 305 - Electrical, Wiring Methods 212 - Machine Guarding 303 - Electrical, General Requirements Three of the 10 sited standards are directed at the construction standard (1926) while other fall within the general industry (1910). It should be noted however that the general industry standard also has fall protection guidelines. Year after year, inspectors see the same on-the-job hazards, any one of which could result in a fatality or severe injury. More than 4,500 workers are killed on the job every year, and approximately 3 million are injured. By understanding these regulations you can improve your safety program and prevent injuries. Give me a call if you have any compliance doubts, or want to review OHSA regulations. Gwido Dlugopolsky at 216-391-7766 or email@example.com
Why does it take a NASCAR pit crew only 15 seconds to change four car tires when it takes people like you and me minutes? The answer is simple SMED. Single Minute Exchange of Dies, or SMED, is a process for reducing the time it takes to do equipment changeovers. Using the principles of SMED you should be able to perform any changeover in your facility in under 10 minutes! The SMED process is simple – convert as many changeover steps as possible to “external”, meaning they are done while your equipment is still RUNNING, while simplifying and streamlining the remaining steps. SMED is broken down into the following 3 Steps: Separate Convert Streamline We found this article to be very helping in explaining the SMED process in more detail: LEAN PRODUCTION - SMED A good first step to achieve this level of SMED efficiency would be to run a kaizen event at your facility to standardize (5S) your tools and supplies. Doing this alone will help you achieve 40% to 50% greater efficiency. Once the “low hanging fruit” is gone, you can still reduce setup times another 20% by practicing more advanced SMED principles.
The secret to closing any sale is to reduce uncertainty in the buyer and replace it with confidence in YOU, your PRODUCT/SERVICE, and your COMPANY. Step 1 – Confidence in YOU Someone buying from you wants to be able to fundamentally connect with you on a human level and feel confident that you’re an expert in what you’re selling If you’re selling paperclips, be an expert in paperclips If you’re selling design and engineering related services, be an expert in design and engineering related services Focus on addressing the problem, not the solution….MEANING you already know you have the solution, connect with the buyer by being an expert with the problem he/she is facing. Prove that you know the problem and all aspects of the problem like the back of your hand. Step 2- Confidence in the PRODUCT/SERVICE you are selling Someone buying from you needs to trust the product/service you are selling will solve their problem. It’s your responsibility to deliver a solution and the benefits associated with it. Basically you need to “Hit a Homerun” communicating this message. Tip – Use Success Stories: Share with the potential buyer examples of your product/service solving problems and delivering value for