Learn about trends affecting NEO manufacturers at our Nov. 19 event!

From Henry Ford-era assembly lines to 3D printing, manufacturing has undergone innovation that has drastically altered the business landscape. The sector is constantly evolving and bursting with new ideas, and many of these are found in the valuable industry of Northeast Ohio. Keeping up with national as well as regional trends is a crucial activity for any manufacturer, and individuals will have the opportunity to do just that at our upcoming presentation, “The State of Manufacturing: Important Trends Affecting Northeast Ohio Manufacturers.”

Sponsored by MAGNET and PNC Bank, the Nov. 19 event will highlight successes in regional manufacturing and discuss the sector’s fiscal future. Following a networking breakfast, the morning will be full of valuable presentations by economic experts, including Gus Faucher (Regional Economist, PNC Bank), Ned Hill (Professor, Ohio State University), and Marty Modarski (Director of Research & Membership, ERC).

These professionals – also available for small group discussions – will offer their thoughts on essential topics such as:

  • The State of Manufacturing: Where We Are and Where We're Going
  • Disturbance in the Force: Economic Data that Keeps Me Up at Night
  • What Should I Pay?: Compensation Trends for NEO Manufacturers

As hosts of this event, representatives from Jergens will also offer open tours of the facility to attendees throughout the morning.

For full details and registration, visit our Events page or contact Linda Barita at 216.391.7766 or linda.barita@magnetwork.orgThe first 50 registrants will receive a complimentary copy of Outliers by bestselling author Malcolm Gladwell!

Print
Posted by Liz Fox in Events

Most Recent

Top 10 Sited Safety and Health Violations

December 13, 2017 by Gwido Dlugopolsky

One remarkable thing about the list is that it rarely changes.  The order may change but the top cited standards typically don’t change. Top 10 Sited Safety and Health Violations: 501 - Fall Protection 1200 - Hazard Communication 451 - Scaffolding 134 - Respiratory Protection 147 - Lockout/Tagout 178 - Powered Industrial Trucks 1053 - Ladders 305 - Electrical, Wiring Methods 212 - Machine Guarding 303 - Electrical, General Requirements Three of the 10 sited standards are directed at the construction standard (1926) while other fall within the general industry (1910).  It should be noted however that the general industry standard also has fall protection guidelines. Year after year, inspectors see the same on-the-job hazards, any one of which could result in a fatality or severe injury. More than 4,500 workers are killed on the job every year, and approximately 3 million are injured. By understanding these regulations you can improve your safety program and prevent injuries. Give me a call if you have any compliance doubts, or want to review OHSA regulations. Gwido Dlugopolsky at 216-391-7766 or gwido.dlugopolsky@magnetwork.org

Complete ANY Changeover in 10 Minutes or LESS

December 11, 2017 by Gwido Dlugopolsky

Why does it take a NASCAR pit crew only 15 seconds to change four car tires when it takes people like you and me minutes? The answer is simple SMED. Single Minute Exchange of Dies, or SMED, is a process for reducing the time it takes to do equipment changeovers. Using the principles of SMED you should be able to perform any changeover in your facility in under 10 minutes! The SMED process is simple – convert as many changeover steps as possible to “external”, meaning they are done while your equipment is still RUNNING, while simplifying and streamlining the remaining steps. SMED is broken down into the following 3 Steps: Separate Convert Streamline We found this article to be very helping in explaining the SMED process in more detail: LEAN PRODUCTION - SMED           A good first step to achieve this level of SMED efficiency would be to run a kaizen event at your facility to standardize (5S) your tools and supplies. Doing this alone will help you achieve 40% to 50% greater efficiency. Once the “low hanging fruit” is gone, you can still reduce setup times another 20% by practicing more advanced SMED principles.

Coffee is STILL for Closers: 3 Things Needed to Close Any Sale

December 07, 2017 by Sam Wasylyshyn

The secret to closing any sale is to reduce uncertainty in the buyer and replace it with confidence in YOU, your PRODUCT/SERVICE, and your COMPANY. Step 1 – Confidence in YOU Someone buying from you wants to be able to fundamentally connect with you on a human level and feel confident that you’re an expert in what you’re selling If you’re selling paperclips, be an expert in paperclips If you’re selling design and engineering related services, be an expert in design and engineering related services Focus on addressing the problem, not the solution….MEANING you already know you have the solution, connect with the buyer by being an expert with the problem he/she is facing. Prove that you know the problem and all aspects of the problem like the back of your hand. Step 2- Confidence in the PRODUCT/SERVICE you are selling Someone buying from you needs to trust the product/service you are selling will solve their problem. It’s your responsibility to deliver a solution and the benefits associated with it. Basically you need to “Hit a Homerun” communicating this message. Tip – Use Success Stories: Share with the potential buyer examples of your product/service solving problems and delivering value for